Is Your Hot Water System Not Working? Here’s What Might Be Happening

Hot water system problems are among the most common plumbing Blacktown issues, so chances are good that you’re wondering what could be wrong with your hot water system if they’re not working. There are many reasons why your hot water system isn’t working anymore. If you notice that the hot water isn’t turning on or heating up, you might need to call a professional plumber in Blacktown area to fix it before it becomes any worse. We have listed some of the most common causes of hot water system problems you should know if you find yourself in this situation soon.

Water Heater Thermostat Is Set Low

If your water heater thermostat is set too low, it could be why your hot water system isn’t working. The thermostat controls the water temperature in the tank, so if it’s set too low, the water won’t get hot enough. You can easily adjust the thermostat by turning it up a few degrees.

Damaged In-Line Valve

A damaged in-line valve is one of the most common reasons your hot water system isn’t working. This valve controls water flow into your home; if it’s damaged, water can’t flow properly.

The Heating Element Burned Out

When the heating element is burnt, your hot water system won’t work. This usually happens due to a power surge or overloading of the system. You’ll need to replace the heating element if you have an electric water heater. If you have a gas water heater, you’ll need to call a professional to service the unit.

The Pilot Light Went Out

One of the most common reasons your hot water system stops working is because the pilot light went out. If you have an electric water heater, this isn’t a problem. However, if you have a gas water heater, the pilot light ignites the gas and allows it to flow to the burner. Please call a professional specialising in hot water plumbing Blacktown system to fix it.

Sediment Build-Up

Over time, sediment can build up in your water heater, causing it to work less efficiently and eventually fail. To prevent this, flush your tank every six months to eliminate any sediment. You’ll know it’s time to do this when you see water dripping from the valve or notice that your hot water takes longer to heat up.

Wrong Size

A water heater that’s too small won’t be able to keep up with demand, resulting in lukewarm showers. On the other hand, a unit that’s too large will waste energy and money by heating water you’re not using. Make sure your water heater is the right size for your home.

Old Water Heater

One of the most common reasons your hot water system might not be working is that it’s simply too old. Over time, water heaters will start to break down and wear out, leading to a loss of performance and efficiency. If your water heater is over ten years old, it’s probably time for a replacement.

If your hot water system Blacktown isn’t working, please get in touch with a plumber to have your system checked for these problems and fix them immediately.

Call Now Button04 1060 2700